Water damage in your home in Lees Summit can be caused by multiple sources. Malfunctioning appliances are some of the most common causes of water damage, and the one that causes the most catastrophic damage is the water heater. Conventional water heater tanks house a reservoir between 20 and 80 gallons of hot water. Once the hot water tap is turned on and hot water leaves the top of the tank, cold water immediately enters through the bottom of the tank to ensure that the reservoir of water is always full. Because this design allows for an endless supply of water, when the water heater tank leaks water will continually flow into your home until the water supply is turned off. From our water damage restoration experts – if your home has a water heater, here are a few ways you can prevent leakage in the first place, and respond quickly to prevent catastrophic water damage.
One of the most common areas to spot water damage from your water heater is around the base. Water leakage around the base of the water heater tank can be caused by a couple different reasons. Some of the most common causes are:
To avoid leaks caused by poor connections, loose valves, or the actual tank itself, the US Department of Energy recommends routine maintenance on water heaters. To keep your water heater operating properly and efficiently, some maintenance procedures that need to be performed are:
When water sits in the tank too long, it can begin to build up materials. This build up can lead to corrosion inside the tank, which can cause the tank to spring a leak. By flushing water through the storage tank regularly, you can help prevent corrosion.
When pressure builds up inside the tank because of excessive temperature, it will cause unnecessary strain. After so long, that pressure will need a way out, and will cause leaks. Pressure and temperature valves will help to catch changes in temperature that will cause pressure to increase, and also detect excessive pressure levels so that they can be taken care of before they cause leaks.
The anode rod is a huge factor in extending the life of your water heater. An anode rod is a steel core wire surrounded with aluminum, magnesium, or zinc. The rod is screwed into the top of your water heater tank, and is designed to corrode in place of your water heater lining. Over time, the rod will become completely corroded, and then it will no longer be able to protect your water heater tank. The average rod lasts between 4-5 years, but if you replace it every 3-4 years you can prevent excess corrosion and exposure. Without replacing the anode rod, you risk rusting inside your water heater, which will likely lead to a leak and costly water damage restoration
To prevent major flooding from the water heater, the automatic water shut off valve will be able to detect the presence of water beneath the water heater and shut off the water supply before there is extensive water damage.
At Kade Cleaning Systems, we have offered water damage restoration from flooding water heaters, so we know how serious it can be. Keep an eye on your water heater and be sure to keep up on maintenance. If you do find yourself in need of water damage restoration whether from your water heater or any other source, call Kade Cleaning Systems.
If this is an emergency, please call (816) 888-9653 for immediate help 24/7.